Silande
Silande
+
  • 5MF210加成型导热灌封胶(1).jpg

MF210 Thermal Conductive Potting Adhesive

Classification:


Features

Introduction:  MF210isatwo-componentsiliconepottingthermalconductivesystem.ComAandComBisinamassratioof10:1.  MF210thermallyconductivesiliconeencapsulantscanbecuredatroomtemperature,butalsocanaccelerat
Message

  Introduction:

  MF210 is a two-component silicone potting thermal conductive system. Com A and Com B is in a mass ratio of 10: 1.

  MF210 thermally conductive silicone encapsulants can be cured at room temperature, but also can accelerate the curing at high temperatures. When cured, no significant contraction in varied materials.

  Features:

  In a wide temperature and humidity range, it can eliminate the stress arising from shock and vibration.

  Good repairability; no by-products generated during curing, no solvent and deep curing.

  Excellent dielectric properties, flame retardancy; excellent thermal conductivity.

  Good waterproof performance; good adhesion with glass, aluminum and PC.

  Purposes:

  Mainly applied in power supplies, ordinary potting connectors, sensors, industrial controllers, transformers, amplifiers, high voltage resistors, relays and power module and the rectifier circuit.

  Instructions:

  1. Surface cleaning: To ensure a good adhesion, prior to use with a clean lint-free cloth to clean the sticky material, ensure dry and free of dirt. The solvent can be acetone, xylene and the like.

  2. Com A, Com B is mixed in mass ratio of 10: 1; both automatically and manually mixing are optional.

  3. Vacuum degassing for potting glue is essential in mixing.

  Restrictions:

  The following materials, such as chemicals, curing agents and plasticizers can inhibit MF210 thermal silicone encapsulants cure, need to pay particular attention to:

  1. Organic tin and other Pb, Hg, As and other ionic compound.

  2. Organotin catalysts containing silicone rubbers.

  3. Containing N, S, P and other organic compounds.

  4. Plasticizer containing an unsaturated hydrocarbon as well as some solder residue.

  Precautions:

  After a long-term place, rubber will be tiered. When using, to make it even by stirring, which does not affect the nature of the adhesive.

  Storage:

  12 months stored in a cool, ventilated and dry place.

  Transportation:

  The product is non-dangerous, can be transported by vehicles, ships, trains and other means.

  Package:

  A component: 10kg / barrel B component: 1kg / barrel

Leave A Message


Submit